"Add-A-Feature™" options
"Add-A-Feature™" options
Why buy The STEADI-PLANK™ Boat Boarding System? …Because you and your guests deserve it!
|
Model |
Click on Image |
Description
of "Add-on" and Replacement Parts |
MSRP |
| FSM |
|
Snap Mount Fork-Set (2 each) NOTE: The ramp forks with the side slide lock are designed to have the tips of the slide locks break if the non-mounted end of the ramp slides off of the support that it rest on and hits up against something or is pinned between objects. This is designed to help prevent damage to the surface that the ramp is mounted to. The side slide locks are replaceable. When using our rail mount system with the 3/8” stainless steel rod, make sure that you use the stainless steel flat washer between the end ring and the cam mount to help prevent the ring from pulling thru the mount. |
$350.00 |
| PCM |  |
Fixed Stainless Steel "STEADI-PLANK™ Cam Mount™" Set (2ea.) w/SS Backing Washers | $350.00 | skeeve mount with cam mount
| PSM |
|
SS Mirror Finish Sleeve Mount Set for use with PCM for the "STEADI-PLANK™ (2ea.) w/SS Backing Washers |
$350.00
|
| VRM |  |
Vertical/Horizontal Rail Mounting adaptor-set When using our rail mount system with the 3/8” stainless steel rod, make sure that you use the stainless steel flat washer between the end ring and the cam mount to help prevent the ring from pulling thru the mount. |
$350.00 |
| PLE |  |
"STEADI-PLANK™ PIN/ side lock Length Extender" Set (2ea.) | $650.00 |
| HRK |  |
"STEADI-PLANK™ Handrail" Kit, compete (4' fixed) ea.( round rail) "STEADI-PLANK™ Handrail" Kit, compete (6' fixed) ea. (round rail) "STEADI-PLANK™ Handrail" Kit, compete (8' 2sec) ea. (round rail) "STEADI-PLANK™ Handrail" Kit, compete (10/12' 2 sec) ea. (round rail) |
$380.00 $430.00 $850.00 $850.00 |
PGM-S |
 |
SS"STEADI-PLANK™ Gunnels Saddle Mount"w/rubber pads-Set 2ea.) Stainless Steel |
$1,690.00 + |
| WEL |  |
STEADI-PLANK™ dock side SS 3" swivel caster Kit with height adjustable wheels. (set of two) |
$430.00 |
| EGP |  |
End Glide Plate (for 4' or 6' PLANK) | $32.00 |
| SGP | Side Glide Pad (for 4' or 6' PLANK) | $20.00 | |
| NSM | Nonskid walkway material (full set for 4' or 6' PLANK) | $80.00 | |
| RMK | Sea Wall/Dock Retractable Mount w/mounting stand. | $4,490.00 | |
| RRM | Sea Wall/Dock Retractable Mount- NO mounting stand. | $1,990.00 |
We are specialist in custom ramp sizes and designs to accommodate your specific needs.
Just contact us and let us help you acquire the Steadi-Plank ramp that is right for you.
Custom size complete PSC-X "STEADI-PLANK™" systems can be manufactured at a cost of approximately $250.00 per sq. ft. or less
Contact us for more information on custom "STEADI-PLANK™" sizes and mounting options.
Specifications and prices are subject to change without notification
Click a link below to Go to:
Standard STEADI-PLANK™ Boat Boarding Ramp Systems©
Wheelchair Accessible Boat Boarding Ramps
Boat Boarding Ramp Install & Set-Up
Boat boarding Ramp Sales Information
